Control Valve: Types, Parts, Working Principle, Applications, Materials, Advantages & Disadvantages
What is a Control Valve?
Control Valve: Types, Parts, Working Principle, Applications, Materials, Advantages & Disadvantages :- Control valve is used for controlling the flow of fluid by varying the size of passage of flow according to the controller and enable direct control over the flow rate. This results in control over process quantities like temperature, liquid level and pressure. It is termed as final control element in automatic control terminology.
The principle behind the working of control valve is that it can control the fluid rate which is based on controller input.
Working Principle of Control Valve
The closing or opening of automatic control valves can be done by pneumatic or hydraulic actuators, electrical actuators. With modulating valve which is set at any position between fully closed and fully open, desired degree of opening is determined by the valve positioners.
Generally air actuated valves are used due to their simplicity because they require only compressed air supply but the electrically operated valves need additional switch gear and cabling and hydraulically actuated valves need return lines for hydraulic fluid and high pressure supply.
Pneumatic control signals are based on pressure of range 0.2 bars to 1.0 bar and an electrical signal of 4mA to 20mA for industries or 0 V to 10 V for heating, ventilation and air conditioning systems. Electrical control includes smart communication signal which is superimposed on 4mA to 20mA control current, so that valve position verification can be signaled back to controller. The highway addressable remote transducer protocol, Profibus and field bus foundation are the common protocols.
Main Parts of Control Valve
- Valve actuator: It is used to move valve modulating elements like butterfly or ball.
- Valve positioner: It is used to check that desired degree of opening is reached or not which overcome the issues of wear and friction.
- Valve body: It contains modulating element, globe, a plug, butterfly or ball.
In case of air operated valve, two control actions are possible.
- Air or current to close: Increment of flow restriction as the control signal value increases.
- Air or current to open: Decrement of flow restriction as the control signal value increases.
Failure to safety mode can also take place
- Air or control signal failure to open: On the failure of compressed air to actuator, under the backup power or by spring pressure the valve gets opened.
- Air or control signal failure to close: On the failure of compressed air to actuator, under the backup power or by spring pressure the valve gets closed.
The operation of modes of failure is required by the failure to safety process control specification of plant. In case of delivering chemical it may fail closed and for cooling water it may fail open.
Types of Control Valves
Control valves can be differentiated on the following basis:
A) Based on Pressure Drop Profile
1. Low Recovery Valve
2. High Recovery Valve
These types of valves regain most of the static pressure drop from inlet to outlet’s vena contracta and are characterized by low recovery coefficient. Examples: Butterfly valve, ball valve, plug valve, gate valve.
B) Based on Movement Profile of Controlling Element
1. Rotary Valve
2. Sliding Stem
C) Based on the Medium of Actuation
1. Manual Valve
These types of valves are actuated by hand wheel.